| About |
|---|
| 4425 is a flexible extrusion PVC compound for automotive insulation requiring a maximum service temperature of 85°C and high-speed TWP constructions. 4425 is suitable for SAE J1128, SAE J1127, SAE 1560, Ford M1L 120A, and Chrysler MS 7889.&& |
| Product Description | |
|---|---|
| Supplier | Axiall Corporation |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good flexibility |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.34 to 1.38 | g/cm³ | ASTM D792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -25.0 | ℃ | ASTM D746 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Stock Temperature | 185 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 10 seconds | 39 to 45 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| — | 20.0 | MPa | ASTM D638 |
| 100% strain | 14.5 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 300 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |