| About |
|---|
| AXIALL’s GP-9190 was developed for low temperature impact was an important consideration. It has superior properties, which, in most cases will facilitate in light weighting of the package. GP-9190 is used for a variety of opaque packaging applications including toiletries, household chemicals, automotive care products and charcoal lighter fluid.&& |
| Product Description | |
|---|---|
| Supplier | Axiall Corporation |
| Generic | PVC，刚硬 |
| Material Status | Commercial: Active |
| Features | low-temperature impact resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.29 to 1.33 | g/cm³ | ASTM D792 |
| PVC unit classification | 16353 | ASTM D1784 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2990 | MPa | ASTM D638 |
| tensile strength | 44.0 | MPa | ASTM D638 |
| bending strength | 73.4 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| 0℃，3.2mm | 1100 | J/m | ASTM D256 |
| 0℃，6.4mm | 680 | J/m | ASTM D256 |
| 23℃，3.2mm | 1300 | J/m | ASTM D256 |
| 23℃，6.4mm | 860 | J/m | ASTM D256 |
| Tensile impact strength | 229 | kJ/m² | ASTM D1822 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 61.2 | ℃ | ASTM D648 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |