Badadur® PBT/ASA GF20

About
20% glass fibres reinforced injection moulding grade with superior mechanical properties&&

Product Description
GenericPBT+ASA
Material StatusCommercial: Negative
AvailabilitysEurope
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density1.43g/cm³ISO 1183
Water absorption rate ISO 62
Saturation, 23 ℃0.30%ISO 62
Equilibrium, 23 ℃, 50% RH0.15%ISO 62

MECHANICALNominal valueUnitTest method
Tensile modulus
23℃5100MPaISO 527-1-2
tensile strength
Fracture, 23 ℃90.0MPaISO 527-2/5
Tensile strain
Fracture, 23 ℃5.0%ISO 527-2/5

IMPACTNominal valueUnitTest method
Charpy Notched Impact Strength ISO 179/1eA
-30℃10kJ/m²ISO 179/1eA
23℃14kJ/m²ISO 179/1eA

THERMALNominal valueUnitTest method
Hot deformation temperature 
0.45 MPa, unannealed200ISO 75-2/B
1.8 MPa, unannealed190ISO 75-2/A
Melting temperature
DSC223ISO 3146
Maximum operating temperature 
20000 h130IEC 216
some hours160

Process Conditions
injectionNominal valueUnitTest method
Drying temperature110 to 130°C
Drying time2.0 to 4.0hr
Processing (melt) temperature245 to 265°C
Mold temperature60 to 100°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Test Specimen accordng to ISO 3167, Type A
3. 80x10x4 mm
4. 110x10x4 mm
5. 10 K/min, Compound for moulding
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.