Badaflex® TPE-S 40A 1000

About
Badaflex® TPE-S 40A 1000是一种热塑性弹性体(TPE)材料,。该产品在欧洲有供货,。&&

Product Description
Generic	TPE
Material Status	Commercial: Negative
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.18	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	40		ISO 868

elastic body	Nominal value	Unit	Test method
tensile strength
yield	3.00	MPa	ISO 37
Tensile strain
fracture	500	%	ISO 37
tear strength	9.0	kN/m	ISO 34-1
Compression deformation			ISO 815
23℃，72 hr	16	%	ISO 815
70℃，24 hr	41	%	ISO 815
100℃，24 hr	70	%	ISO 815

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.