| About |
|---|
| Badamid® LC70 M30 TM-Z3 is a Polyamide 6 + PA 66/6 (Nylon 6+Nylon 66/6) material filled with 30% mineral. It is available in Europe. Primary attribute of Badamid® LC70 M30 TM-Z3: Flame Rated.&& |
| Product Description | |
|---|---|
| Generic | PA 6+PA 66/6 |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data |
|---|
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Processing (melt) temperature | 285 to 305 | °C | |
| Mold temperature | 80 to 110 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10 K/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |