| About |
|---|
| Properties: Shorter molding time, easily demolding, High resilience, Low abrasion loss, Excellent transparency. Application: Shoe sole and Shoe insole, Shoe decorations, Children Shoe , Garden shoe, Sandy shoe, Safety shoe.&& |
| Product Description | |
|---|---|
| Supplier | Bangtai |
| Generic | TPU-醚 |
| Material Status | Commercial: Active |
| Features | Good Clarity,Elastic,Good wear resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 to 1.19 | g/cm³ | JIS K7311 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 68 to 72 | JIS K7311 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | JIS K7311 | ||
| 100% strain | 3.92 | MPa | JIS K7311 |
| 300% strain | 7.85 | MPa | JIS K7311 |
| tensile strength | 19.6 | MPa | JIS K7311 |
| Tensile strain | |||
| fracture | 580 | % | JIS K7311 |
| tear strength | 69 | kN/m | JIS K7311 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 100 | °C | |
| Drying time | 3.0 to 5.0 | hr | |
| Processing (melt) temperature | 170 to 200 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |