| About |
|---|
| This resin is a medium molecular weight film resin with excellent tensile, impact, and tear properties.This product meets US FDA 21 CFR 177.1520.&& |
| Product Description | |
|---|---|
| Generic | MDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,High impact resistance,Good tear strength |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.936 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.30 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 25 | µm | |
| tensile strength | |||
| TD, fracture | 37.6 | MPa | ASTM D882 |
| MD, fracture | 51.7 | MPa | ASTM D882 |
| Tensile strain | |||
| TD, fracture | 800 | % | ASTM D882 |
| MD, fracture | 300 | % | ASTM D882 |
| Drop hammer impact | |||
| 25 µm | 50 | g | ASTM D1709-A |
| Elmandorf tear strength | |||
| MD | 15 | g | ASTM D1922 |
| tear strength | |||
| TD | 1500 | g | ASTM D1922 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |