| About |
|---|
| Product Description | |
|---|---|
| Supplier | Covestro |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Flame Characteristics,Heat Resistance, Good,Solvent resistance,High ESCR,V-0,5VA,5VB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 240℃，5 kg | 26 | g/10min | ASTM D1238 |
| Shrinkage rate | 0.40-0.60 | % | ASTM D955 |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.50 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2800 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 60.0 | MPa | ASTM D 638 |
| fracture | 45.0 | MPa | ASTM D 638 |
| Tensile strain | ASTM D 638 | ||
| Yield, 23 ℃ | 4.0 | % | ASTM D 638 |
| Fracture, 23 ℃ | >50 | % | ASTM D 638 |
| bending strength | |||
| 5% stress | 95 | MPa | ASTM D 790 |
| Bending modulus | 2700 | MPa | ASTM D 790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 430 | J/m | ASTM D256 |
| Instrumented total impact energy | 49 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.82 MPa, unannealed, 6.4mm | 82 | ℃ | ASTM D648 |
| Vicat Softening Temp | |||
| B50 | 108 | ℃ | ISO 306 |
| B120 | 110 | ℃ | ISO 306/B120 |
| Linear coefficient of thermal expansion | 7.7E-5 | 1/℃ | ISO 11359-2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | >1.0E+14 | ohms | D 3638 |
| Volume resistivity | |||
| 23℃ | >1.0E+16 | ohms·cm | IEC 60093 |
| Dielectric strength | |||
| 23 ℃，1 mm | 35 | kV/mm | IEC 60243-1 |
| Relative dielectric constant | IEC 60250 | ||
| 100 Hz | 3.20 | IEC 60250 | |
| 1 MHz | 3.10 | IEC 60250 | |
| Dissipation factor | IEC 60250 | ||
| 100 Hz | 5.0E-3 | IEC 60250 | |
| 1 MHz | 7.0E-3 | IEC 60250 | |
| Compared to the leakage tracing index | |||
| Solution A | 500 | V | IEC 60112 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |