Baydur® GS-772

About
Baydur GS-772 is a solid polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two reactive liquid components. Component A is a polymetric diphenylmethane diisocyanate (PMDI) and component B is a formulated polyol system. Baydur GS-772 system is used in applications where harsh environmental conditions are encountered, such as pump housings, catch basins, and underground equipment. It is also used as a replacement for cast iron where the application requires weight reduction, improved corrosion resistance, and/or improved abrasion resistance. As with and product, use of the Baydur GS-772 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.&&

About

Baydur GS-772 is a solid polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two reactive liquid components. Component A is a polymetric diphenylmethane diisocyanate (PMDI) and component B is a formulated polyol system. Baydur GS-772 system is used in applications where harsh environmental conditions are encountered, such as pump housings, catch basins, and underground equipment. It is also used as a replacement for cast iron where the application requires weight reduction, improved corrosion resistance, and/or improved abrasion resistance. As with and product, use of the Baydur GS-772 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.&&

Product Description
Supplier	Covestro
Generic	PUR+MDI
Material Status	Commercial: Active
Features	Corrosion Resistant,Good wear resistance,V-0
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density
—	0.708	g/cm³	ASTM D1622
—	1.13	g/cm³	ASTM D792
Shrinkage rate
MD	1.0 to 1.2	%	Internal Method

film	Nominal value	Unit	Test method
film thickness
test	6400	µm

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	48	J/m	ASTM D256
Notched impact strength of cantilever beam	370	J/m	ASTM D256

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	76		ASTM D2240
tensile strength
fracture	39.3	MPa	ASTM D638
Tensile strain
fracture	10	%	ASTM D638
Bending modulus	1380	MPa	ASTM D790
bending strength	60.0	MPa	ASTM D790
compressive strength	34.5	MPa	ASTM D695

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	98.9	℃	ASTM D648
Thermosetting components
Component A	按重量计算的混合比: 100, 按容量计算的混合比: 86
Component B	按重量计算的混合比: 100, 按容量计算的混合比: 100

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.