| About |
|---|
| Bayfill 500 is a moldable semi-rigid polyurethane foam system. Bayfill 500 system is designed for backfilling flexible TPU and vinyl skins. Bayfill 500 Component B is reacted with Bayfill 400 Component A to produce instrument panels, center consoles and other protective padding for the automotive industry. As with any product, use of Bayfill 500 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability for use.&& |
| Product Description | |
|---|---|
| Supplier | Covestro |
| Generic | PUR |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.200 | g/cm³ | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 35 | ||
| Component B | 按重量计算的混合比: 400 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Asker C | 20.0 | ||
| tensile strength | |||
| 3.80 mm | 0.310 | MPa | JIS K6251 |
| Tensile strain | |||
| Fracture, 3.80 mm | 53 | % | JIS K6251 |
| Tear resistance | 800.0 | N/m | JIS K6252 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |