| About |
|---|
| Baytec MS-052 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer used in the manufacture of high-property solid cast polyurethane elastomers. When extended with 1,4-butanediol, this material complies with FDA regulation 21 CFR 177.2600 (Rubber Articles Intended for Repeated Use) and may be used for wet and dry repeated-use food-contact applications. When extended with HQEE, it complies with 21 CFR 177.1680 (Polyurethane Resins) and may be used for repeated-use food contact only with dry foods having no free surface fats or oils. As with any product, use of Baytec MS-052 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.&& |
| Product Description | |
|---|---|
| Supplier | Covestro |
| Generic | PUR-酯+MDI |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| elastic body | Nominal value | Unit | Test method |
| tensile strength | ASTM D412 | ||
| fracture | 37.0 | MPa | ASTM D412 |
| 100% strain | 4.69 | MPa | ASTM D412 |
| 200% strain | 6.76 | MPa | ASTM D412 |
| 300% strain | 10.2 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 530 | % | ASTM D412 |
| tear strength | |||
| — | 91.1 | kN/m | ASTM D624 |
| cracking | 26 | kN/m | ASTM D1938 |
| Compression deformation | |||
| 70℃，22 hr | 24 | % | ASTM D395 |
| Basho’s elasticity | 52 | % | ASTM D2632 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 80 | ASTM D2240 | |
| Taber abraser | |||
| 1000 cycles, 1000 g, H-18 wheels | 16.0 | mg | ASTM D4066 |
| compression deformation | ASTM D575 | ||
| 10% | 1.46 | MPa | ASTM D575 |
| 15% | 2.28 | MPa | ASTM D575 |
| 2% | 0.0552 | MPa | ASTM D575 |
| 20% | 3.07 | MPa | ASTM D575 |
| 25% | 3.93 | MPa | ASTM D575 |
| 5% | 0.600 | MPa | ASTM D575 |
| 50% | 11.9 | MPa | ASTM D575 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |