Baytec® OCS 080D

About
Baytec OCS 080D is a two-component polyurethane/-urea system that yields an optically clear solid elastomer. The isocyanate component A is an aliphatic isocyanate-terminated (rMDI) polyester prepolymer, and the polyol component is a proprietary polyester formulation. The Baytec OCS 080D system can be used to produce highly transparent, optical/ballistic-grade parts for applications ranging from ophthalmic lenses to bulletproof enclosures. As with any product, the Baytec OCS 080D system must be tested (including field testing, etc) in advance by the user to determine suitability for a given application.&&

About

Baytec OCS 080D is a two-component polyurethane/-urea system that yields an optically clear solid elastomer. The isocyanate component A is an aliphatic isocyanate-terminated (rMDI) polyester prepolymer, and the polyol component is a proprietary polyester formulation. The Baytec OCS 080D system can be used to produce highly transparent, optical/ballistic-grade parts for applications ranging from ophthalmic lenses to bulletproof enclosures. As with any product, the Baytec OCS 080D system must be tested (including field testing, etc) in advance by the user to determine suitability for a given application.&&

Product Description
Supplier	Covestro
Generic	PUR-酯+MDI
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.11	g/cm³	ASTM D1505

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	70	J/m	ASTM D256

optical performance	Nominal value	Unit	Test method
Refractive index	1.530		ASTM D542
Transmittance	92.0	%	ASTM D1003
Haze	< 0.50	%	ASTM D1003
Dispersion coefficient	43.0

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	81		ASTM D2240
tensile strength	59.5	MPa	ASTM D638
Bending modulus	1720	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	68.1	℃	ASTM D648
Thermosetting components
Component A	按重量计算的混合比: 170
Component B	按重量计算的混合比: 100

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.