Baytec® P-132

About
Baytec P-132 system spray elastomer forms a tough, mar resistant coating with a hardness of 95 Shore A. As with any product, use of Baytec P-132 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability for use.&&

Product Description
SupplierCovestro
GenericTSU
Material StatusCommercial: Active
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
elastic bodyNominal valueUnitTest method
tensile strength12.9MPaASTM D412
Tensile strain
fracture75%ASTM D412
tear strength31.5kN/mASTM D624

THERMALNominal valueUnitTest method
Thermosetting components 
Component A按重量计算的混合比: 50, 按容量计算的混合比: 1.0 
Component B按重量计算的混合比: 100, 按容量计算的混合比: 2.4 

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A93 to 98 ASTM D2240
Taber abraser
1000 cycles139mgASTM D1044

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.