Baytec® SPR-092A

About
Baytec SPR-092A is a two-component, 100%-solids spray system with a Shore A hardness of 92. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the polyol component is a polyether polyol blend. The system has added UV stabilizers and is used in spray applications to improve the corrosion, weather, and abrasion resistance of various surfaces. In-mold application is also possible. Typical applications include protective layers for pipes, tanks, fabrics, wood, flexible foams, and other industrial surfaces. The system can be pigmented to almost any color. As with any product, use of the Baytec SPR-092A system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.&&

About

Baytec SPR-092A is a two-component, 100%-solids spray system with a Shore A hardness of 92. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the polyol component is a polyether polyol blend. The system has added UV stabilizers and is used in spray applications to improve the corrosion, weather, and abrasion resistance of various surfaces. In-mold application is also possible. Typical applications include protective layers for pipes, tanks, fabrics, wood, flexible foams, and other industrial surfaces. The system can be pigmented to almost any color. As with any product, use of the Baytec SPR-092A system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.&&

Product Description
Supplier	Covestro
Generic	PUR-脂肪族+MDI
Material Status	Commercial: Active
Features	Weather resistance is good
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.08	g/cm³	ASTM D792
Water absorption rate
30days	1.5	%	Internal Method

elastic body	Nominal value	Unit	Test method
tensile strength	15.2 to 15.9	MPa	ASTM D412
Tensile strain
fracture	490 to 580	%	ASTM D412
tear strength
—	59.5 to 71.8	kN/m	ASTM D624
cracking	19 to 23	kN/m	ASTM D1938

THERMAL	Nominal value	Unit	Test method
Thermosetting components
Component A	按重量计算的混合比: 100
Component B	按重量计算的混合比: 100

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	92		ASTM D2240
Taber abraser
1000 cycles, 1000 g, H-18 wheels	150	mg	ASTM D1044

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.