Baytec® SPR-092A Black

About
Baytec SPR-092A Black is a two-component, 100%-solids thick film coating spray system with a Shore A hardness of 92. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the B component is a polyether polyol amine blend. The system has added UV stabilizers and is used in industrial applications to improve the corrosion, weather, and abrasion resistance of various surfaces. The system is pigmented black. Typical applications include wastewater infrastructure, pipes, secondary containment, foams, and other industrial surfaces. As with any product, use of the Baytec SPR-092A Black system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.&&

About

Baytec SPR-092A Black is a two-component, 100%-solids thick film coating spray system with a Shore A hardness of 92. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the B component is a polyether polyol amine blend. The system has added UV stabilizers and is used in industrial applications to improve the corrosion, weather, and abrasion resistance of various surfaces. The system is pigmented black. Typical applications include wastewater infrastructure, pipes, secondary containment, foams, and other industrial surfaces. As with any product, use of the Baytec SPR-092A Black system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.&&

Product Description
Supplier	Covestro
Generic	PUR-脂肪族+MDI
Material Status	Commercial: Active
Features	Weather resistance is good,Corrosion Resistant,Good wear resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.08	g/cm³	ASTM D792
Water absorption rate
30days	1.5	%	Internal Method

elastic body	Nominal value	Unit	Test method
tensile strength
fracture	15.2 to 15.9	MPa	ASTM D412
Tensile strain
fracture	490 to 580	%	ASTM D412
tear strength	59.5 to 71.8	kN/m	ASTM D624
Split	19.3 to 22.8	kN/m	ASTM D1938

THERMAL	Nominal value	Unit	Test method
Thermosetting components
Component A	按容量计算的混合比: 100
Component B	按容量计算的混合比: 100

Supplementary information	Nominal value	Unit	Test method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	92		ASTM D2240
Taber abraser
1000 cycles, 1000 g, H-18 wheels	150	mg	ASTM D1044

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.