| About |
|---|
| BB-AMIDE 5033 is a medium low viscosity reactive polyamide resin. This resin is designed for use with solid or liquid epoxy resins to give tough, chemical resistant thermoset coatings with room temperature cure. BB-AMIDE 3033/epoxy resin systems are used in maintenance coatings, and high solids enamel paint formulations.&& |
| Product Description | |
|---|---|
| Generic | PA Not specified |
| Material Status | Commercial: Active |
| Features | Good flexibility,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| storage stability | |||
| 25 ℃ | 1400 to 2900 | min | |
| 25 ℃ | 120 | min | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Active Content | 100 | % | |
| Amine Value | 370 to 420 | mg KOH/g | |
| Mixing ratio | |||
| Using liquid epoxy resin | 50 | % | |
| with solid epoxy resin | 30 | % |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Gardner color | < 10.0 | ||
| Brookfield viscosity | |||
| 25℃ | 6.00 to 8.00 | Pa·s |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. on 200 g mass with liquid epoxy resin |
| 3. on 200 g mass with solid epoxy resin |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |