Bergamid™ B70 G20 Natural

About
Glass fiber reinforced PA6 compound&&

Product Description
Supplier	Polyone
Generic	PA6
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.26 to 1.30	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	7000	MPa	ISO 527-2
tensile strength
fracture	150	MPa	ISO 527-2
Tensile strain
fracture	3.5	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	10	kJ/m²	ISO 179
Charpy Unnotch Impact strength
23℃	70	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	220	℃	ISO 75-2/B
1.8 MPa, unannealed	200	℃	ISO 75-2/A
Melting temperature
DSC	215 to 225	℃	ISO 3146

Electrical performance	Nominal value	Unit	Test method
Compared to the leakage tracing index	500	V	IEC 60112

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
3.20 mm	HB		Internal Method

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	4.0	hr
Processing (melt) temperature	260 to 290	°C
Mold temperature	50 to 90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.