Beta (ß)-PP™ BE60-7032

About
BE60-7032 is a high molecular weight, low melt flow rate polypropylene homopolymer with fine grained ß-modification crystalline structure leading to excellent impact strength even at low temperatures, increased hydrostatic strength and improved chemical resistance. The material is coloured grey based on RAL 7032. Applications BE60-7032 is recommended for pressure pipes and fittings, chemical engineering components, extruded and compression moulded sheets, filter plates and solid rods. Industrial Non-pressure pipe systems Pressure pipes Sheets and profiles&&

About

BE60-7032 is a high molecular weight, low melt flow rate polypropylene homopolymer with fine grained ß-modification crystalline structure leading to excellent impact strength even at low temperatures, increased hydrostatic strength and improved chemical resistance. The material is coloured grey based on RAL 7032. Applications BE60-7032 is recommended for pressure pipes and fittings, chemical engineering components, extruded and compression moulded sheets, filter plates and solid rods. Industrial Non-pressure pipe systems Pressure pipes Sheets and profiles&&

Product Description
Supplier	Borealis AG
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Low liquidity,High impact resistance,Renewable resources,High molecular weight,Solvent resistance,low-temperature impact resistance,Homopolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	0.30	g/10min	ISO 1133
190℃，5.0kg	0.50	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Product tensile strength	30.000	MPa	ISO 527-2
Elastic modulus	1300	MPa	ISO 527
Product elongation	10	%	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Melting temperature	200 to 230	℃	ISO 11357-3

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	50	kJ/m²	ISO 179/1eA
-20℃	5.00	kJ/m²	ISO 179/1eA

Process Conditions
injection	Nominal value	Unit	Test method
Injection temperature
Rear barrel temperature	190-230	°C
Central temperature of the barrel	200-230	°C
Barrel front temperature	200-230	°C
Die temperature	200-230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.