| About |
|---|
| BFI Conductive Film is a Polyethylene material filled with carbon fiber. It is available in North America. Primary attribute of BFI Conductive Film: Conductive. Typical applications include: Bags/Liners Hose/Tubing Packaging&& |
| Product Description | |
|---|---|
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Conductive,No shedding |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| film | Nominal value | Unit | Test method |
| tensile strength | |||
| MD, fracture | > 13.8 | MPa | ASTM D882 |
| Tensile strain | |||
| MD, fracture | > 150 | % | ASTM D882 |
| Drop hammer impact | 250 to 700 | g | ASTM D1709 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | < 3.0E+4 | ohms | ASTM D257 |
| Volume resistivity | < 3.0E+4 | ohms·cm | ASTM D991 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Burst Strength（Mullen） | 0.138 to 0.414 | MPa | ASTM D774 |
| Heat Seal Temperature | 121 to 191 | ℃ | |
| tear strength | > 70.1 | kN/m | ASTM D882 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Time: 0.5 – 3.5 seconds Pressure: 30 – 70 PSI |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |