Biffa r-HDPE Injection Grade

About
HDPE INJECTION GRADE is a pigmented, injection grade recycled compound. The product is degassed during processing to produce a compound which boasts uniform melt flow and density, along with consistent pellet appearance.&&

Product Description
Generic	HDPE
Material Status	Commercial: Negative
Features	High density
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.950	g/cm³
Melt Flow Rate
190℃，2.16kg	5.0 to 7.0	g/10min

Process Conditions
injection	Nominal value	Unit	Test method
Residual Moisture Content – Volatiles	< 1.0	%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.