| About |
|---|
| r-HDPE Tech Grade is a non-pigmented, extrusion grade post consumer recycled compound. The product is manufactured from hot washed, density-separated and super-cleaned raw material, and compounded to a pellet with uniform melt flow and density, along with consistent pellet appearance.&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | High density |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| 20℃ | 0.950 to 0.964 | g/cm³ | |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.50 to 0.70 | g/10min | |
| Color（deltaE versus virgin HDPE） | 20 to 30 | ||
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Migration | < 10.0 | ppb | |
| Particle size | 3.00 | mm | |
| Volatiles – by Headspace GC-FID | < 0.300 | ppm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Migration conditions dependant on use |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |