| About |
|---|
| Bio-Flex ® F 2110 (prev. Bio-Flex® 467F) Biodegradable compound for film extrusion&& |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | Biodegradable,Food contact compliance,Compostable |
| Availabilitys | Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ISO 1183 |
| bulk density | 0.770 | g/cm³ | ISO 60 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.0-5.0 | g/10min | ISO 1133 |
| Moisture permeability | 130 | g/m²/day | ISO 15 106-3 |
| Oxygen permeability | 1450 | g/m²/day | ISO 15 105-2 |
| Nitrogen transport | 6.99 | cc-mm/m²-24hr-atm | DIN 53380-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃ | 20.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Yield, 23 ℃ | >=300 | % | ISO 527-2 |
| Tensile modulus | |||
| 23℃ | 730 | MPa | ISO 527-2 |
| bending strength | |||
| 23℃ | 17.0 | MPa | ISO 178 |
| Bending modulus | |||
| 23℃ | 680 | MPa | ISO 178 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 145-160 | ℃ | ISO 11357-3 |
| Vicat Softening Temp | |||
| A50 | 78.0 | ℃ | ISO 306/A50 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Melt volume flow rate | 3-4 | cm3/10 min |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | NB | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| 23℃ | 83.0 | kJ/m² | ISO 179/1eA |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |