BioBatch 1852 - SOLIAO

About
TechnoCompound GmbH offers highly flexible biodegradable compounds under the name BioBatch. These polymers consist of biopolymers and special additives that are certified in accordance with DIN EN 13432 as well as ASTM D6400 by DIN CERTCO. Typical applications are garden and agricultural films, garbage bags, hygiene and packaging films. BioBatch 1851 and 1852 are composed of bio-based as well as fossil raw materials. Both products are suitable for printing without pre-treatment, for welding and bonding. Of course, BioBatch compounds may also be dyed. BioBatch compounds can be processed on standard extrusion lines. Film lines processing PE-LD or PE-LLD can be switched to BioBatch without any modifications. Due to their compatibility with polyethylene changeovers do not require an interruption of the production process. Only a fine-tuning of the temperature profiles may be reqired.&&

About

TechnoCompound GmbH offers highly flexible biodegradable compounds under the name BioBatch. These polymers consist of biopolymers and special additives that are certified in accordance with DIN EN 13432 as well as ASTM D6400 by DIN CERTCO. Typical applications are garden and agricultural films, garbage bags, hygiene and packaging films. BioBatch 1851 and 1852 are composed of bio-based as well as fossil raw materials. Both products are suitable for printing without pre-treatment, for welding and bonding. Of course, BioBatch compounds may also be dyed. BioBatch compounds can be processed on standard extrusion lines. Film lines processing PE-LD or PE-LLD can be switched to BioBatch without any modifications. Due to their compatibility with polyethylene changeovers do not require an interruption of the production process. Only a fine-tuning of the temperature profiles may be reqired.&&

Product Description
Generic	生物可降解聚合物
Material Status	Commercial: Active
Features	Renewable resources,Good Printability,Biodegradable,High Flexibility,Welding
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.25	g/cm³
Melt Flow Rate	4.5	g/10min

MECHANICAL	Nominal value	Unit
Shore hardness
Shaw’s D	49
tensile strength
yield	22.8	MPa
—	31.0	MPa
Tensile strain
yield	3.5	%
fracture	490	%

Process Conditions
injection	Nominal value	Unit	Test method
Residual Moisture Content	< 0.030	%

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.