Biocycle 18BC-1

About
Characteristics of the product: Yellowish white powder, with a high degree of purity of over 99.5% and humidity below 0.3%. Weight-average molecular weight of approximately 600,000 g/mol. Basic Raw Material: Saccharose Microorganism: Bacteria of the alcaligene genus Obtention Process: Biosynthesis of the polymer by aerobic fermentation and extraction purification of the polymer through natural solvent. Advantages: The polymer is totally biodegradable and renewable with its final decomposition in water and carbon dioxide through the action of microorganisms in natural environment; When placed in composting units, the polymer quickly decomposes and doesn’t affect the quality of the compost produced. The polymer can be dyed by using biodegradable masterbatches in conventional dying processes. The polymer can be printed with paints and conventional printing processes, using surface treatment which are also conventional.&&

About

Characteristics of the product: Yellowish white powder, with a high degree of purity of over 99.5% and humidity below 0.3%. Weight-average molecular weight of approximately 600,000 g/mol. Basic Raw Material: Saccharose Microorganism: Bacteria of the alcaligene genus Obtention Process: Biosynthesis of the polymer by aerobic fermentation and extraction purification of the polymer through natural solvent. Advantages: The polymer is totally biodegradable and renewable with its final decomposition in water and carbon dioxide through the action of microorganisms in natural environment; When placed in composting units, the polymer quickly decomposes and doesn’t affect the quality of the compost produced. The polymer can be dyed by using biodegradable masterbatches in conventional dying processes. The polymer can be printed with paints and conventional printing processes, using surface treatment which are also conventional.&&

Product Description
Generic	生物可降解聚合物
Material Status	Commercial: Active
Features	High purity,Renewable resources,Sprayable,Good Printability,Biodegradable
Availabilitys	Latin America
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30	g/cm³	ASTM D792 , ISO 1183
Melt Flow Rate
190℃，2.16kg	16	g/10min	ASTM D1238，ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	24.0	MPa	ISO 527-2
—	25.0	MPa	ASTM D638
Tensile strain
fracture	2.2	%	ASTM D638
fracture	2.0	%	ISO 527-2
Bending modulus
—	2400	MPa	ASTM D790
—	2450	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
—	20	J/m	ASTM D256
—	19	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	117	℃	ASTM D648，ISO 75-2/B
1.8 MPa, unannealed	65.0	℃	ASTM D648，ISO 75-2/A
Vicat Softening Temp	135	℃	ASTM D1525 , ISO 306/A120
Melting peak temperature	165 to 170	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.