BiologiQ™ GS270

About
BiologiQ focuses on creating plastic materials from the starch of renewable resources. Our bioplastic resin pellets are made from sustainable agriculture and are 100% natural and safe. BiologiQ GS270 is a plasticized thermoplastic starch (TPS) resin we call EcoStarch Resin (ESR). Supplied in pellet form. Applications: BiologiQ GS270 is a thermoplastic starch (TPS) polymer suitable for blending with petro-chemical or bioresins where biobased content is desired. Can be used as a stand-alone polymer for certain low-temp injection molding applications Highly compostable and biodegradable. GS270 forms a crystalline structure product that has good strength and low plasticity. When the GS270 absorbs moisture it exhibits plastic behavior and becomes flexible. When removed from a humid environment the material dries out and becomes crystalline again. Used for final products requiring plasticity such as plastic dinnerware (plates, cups, and plastic utensils). Packaging structures such as thermoformed trays for various industries. Blended with PE to make thin film products such as shopping bags.&&

About

BiologiQ focuses on creating plastic materials from the starch of renewable resources. Our bioplastic resin pellets are made from sustainable agriculture and are 100% natural and safe. BiologiQ GS270 is a plasticized thermoplastic starch (TPS) resin we call EcoStarch Resin (ESR). Supplied in pellet form. Applications: BiologiQ GS270 is a thermoplastic starch (TPS) polymer suitable for blending with petro-chemical or bioresins where biobased content is desired. Can be used as a stand-alone polymer for certain low-temp injection molding applications Highly compostable and biodegradable. GS270 forms a crystalline structure product that has good strength and low plasticity. When the GS270 absorbs moisture it exhibits plastic behavior and becomes flexible. When removed from a humid environment the material dries out and becomes crystalline again. Used for final products requiring plasticity such as plastic dinnerware (plates, cups, and plastic utensils). Packaging structures such as thermoformed trays for various industries. Blended with PE to make thin film products such as shopping bags.&&

Product Description
Generic	TPS
Material Status	Commercial: Active
Features	Good Rigidity,Renewable resources,Crystal,Biodegradable,Compostable
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.40	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	2.0	g/10min	ASTM D1238
water content	< 1.0	%	ASTM D6980

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1500	MPa	ASTM D638
tensile strength			ASTM D638
yield	> 30.0	MPa	ASTM D638
fracture	> 30.0	MPa	ASTM D638
Tensile strain
fracture	< 10	%	ASTM D638

IMPACT	Nominal value	Unit	Test method
Impact Resistance（Dart）	3500	g	ASTM D5628

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	81.0 to 100	℃	ASTM D3418
Melting peak temperature	166 to 180	℃	ASTM D3418

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	60	°C
Drying time	1.0 to 4.0	hr
Recommended maximum moisture content	< 1.0	%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.