| About |
|---|
| Bionate® 65D is a Polycarbonate + TPU (PC+TPU) product. It can be processed by extrusion or injection molding and is available in North America. Applications of Bionate® 65D include medical/healthcare and food contact applications. Characteristics include: Biocompatible Good Aesthetics Good Flexibility High ESCR (Stress Crack Resistant) Wear Resistant&& |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PC+TPU |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Optical performance,Biocompatible,Inoxidizability,Good wear resistance,High ESCR |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 224℃，1.20kg | 10 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 66 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| limit | 62.2 | MPa | ASTM D638 |
| 50% strain | 25.4 | MPa | ASTM D638 |
| 100% strain | 31.7 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 280 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 188 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |