| About |
|---|
| Bionate® 80A is a Polycarbonate + TPU (PC+TPU) product. It can be processed by extrusion or injection molding and is available in North America. Applications of Bionate® 80A include medical/healthcare and food contact applications. Characteristics include: Biocompatible Good Aesthetics Good Flexibility High ESCR (Stress Crack Resistant) Wear Resistant&& |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PC+TPU |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Optical performance,Biocompatible,Inoxidizability,Good wear resistance,High ESCR |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 224℃，1.20kg | 22 | g/10min | ASTM D1238 |
| Shrinkage rate | ASTM D955 | ||
| MD | 0.0 to 3.0 | % | ASTM D955 |
| MD | 1.2 | % | ASTM D955 |
| Water absorption rate | |||
| saturated | 1.2 | % | ASTM D570 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 64.8 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 78.3 | ℃ | ASTM D1525 |
| Linear coefficient of thermal expansion | |||
| MD | 1.6E-4 | 1/℃ | ASTM E831 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 17 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 60 Hz | 5.00 | ASTM D150 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 83 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| limit | 46.6 | MPa | ASTM D638 |
| 50% strain | 4.37 | MPa | ASTM D638 |
| 100% strain | 6.01 | MPa | ASTM D638 |
| 300% strain | 16.9 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 530 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 28.7 | MPa | ASTM D790 |
| bending strength | |||
| 5% strain | 1.24 | MPa | ASTM D790 |
| friction coefficient | |||
| With oneself – dynamic | 1.5 | ASTM D1894 | |
| Taber abraser | |||
| 1000 cycles, 1000 g, H-18 wheels | 5.70 | mg | ASTM D1044 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 177 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 4.0 in disk |
| 3. Flame bar |
| 4. Die C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |