BioPBS™ FD92PB

About

Product Description
Material StatusCommercial: Negative
Featuresprocessability,Soft,Good heat sealing,Biodegradable
Process MethodsExtrusion

Technical Data
PHYSICALNominal valueUnitTest method
Density1.24g/cm³ISO 1183
Melt Flow Rate
190°C,2.16 kg4g/10minISO 1133

THERMALNominal valueUnitTest method
melting point84ISO 3146

MECHANICALNominal valueUnitTest method
Tensile modulus
MD280MPaISO 527-3
TD320MPa
Tensile stress
MD: Yield18MPaISO 527-3
TD: Yield17MPaISO 527-3
MD: Fracture32MPaISO 527-3
TD: Fracture27MPaISO 527-3
Tensile strain
MD: Fracture600%ISO 527-3
TD: Fracture580%ISO 527-3
Elmendorf tear strength
MD2N/mmISO 6383-2
TD5N/mmISO 6383-2

IMPACTNominal valueUnitTest method
Puncture impact6kJ/mInternal Method

Process Conditions
extrusionNominal valueUnitTest method
Processing temperature130 – 150
Gap between material ports0.8 – 1.0mm
Explosion rate2 – 4
drying temperature70
Drying time5hr

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.