| About |
|---|
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Features | processability,Soft,Good heat sealing,Biodegradable |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.26 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190°C，2.16 kg | 15 | g/10min | ISO 1133 |
| water content | <1000 | ppm | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | >84 | ℃ | ISO 3146 |
| Sealing startup temperature* | 130 | ℃ | |
| Operating temperature | 高达60 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| extrusion | Nominal value | Unit | Test method |
| Melt Temperature | 235 – 245 | ℃ | |
| Material inlet temperature | 140 | ℃ | |
| Barrel temperature | 160 – 235 | ℃ | |
| Adapter temperature | 235 – 245 | ℃ | |
| Mold temperature | 235 – 245 | ℃ | |
| Cold rolling temperature | ≤20 | ℃ | |
| Gap | 最小或10 | cm | |
| Minimum coating weight | 20 | gsm | |
| Corona treatment | ≥ 8 | kW | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |