| About |
|---|
| Product Description | |
|---|---|
| Material Status | Commercial: Negative |
| Features | processability,Soft,Good heat sealing,Biodegradable |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.26 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190°C，2.16 kg | 22 | g/10min | ISO 1133 |
| Shrinkage rate | 0.014 ± 0.001 | mm/mm | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 115 | ℃ | ISO 3146 |
| Hot deformation temperature | |||
| 0.45 MPa | 95 | ℃ | ISO 75-1 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile stress | |||
| yield | 40 | MPa | ISO 527-2 |
| fracture | 30 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 170 | % | ISO 527-2 |
| Bending modulus | 630 | MPa | ISO 178 |
| bending strength | 40 | MPa | ISO 178 |
| Rockwell hardness | 107 | R Scale | ISO 2039-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | |||
| 23℃ | 7 | KJ/m² | ISO 180 |
| Process Conditions | |||
|---|---|---|---|
| extrusion | Nominal value | Unit | Test method |
| drying temperature | 80 | ℃ | |
| Drying time | 5 | hr | |
| Nozzle temperature | 190 | ℃ | |
| Temperature of the front section of the material barrel | 200 | ℃ | |
| Temperature in the middle section of the barrel | 190 | ℃ | |
| Temperature of the rear section of the barrel | 180 | ℃ | |
| Hopper temperature | 60 | ℃ | |
| Mold temperature | 25 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |