| About |
|---|
| Product Description | |
|---|---|
| Material Status | Commercial: Negative |
| Features | processability,Soft,Good heat sealing,Biodegradable |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.26 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190°C，2.16 kg | 5 | g/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 115 | ℃ | ISO 3146 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| MD | 575 | MPa | ISO 527-3 |
| TD | 590 | MPa | |
| Tensile stress | |||
| MD: Yield | 39 | MPa | ISO 527-3 |
| TD: Yield | 38 | MPa | ISO 527-3 |
| MD: Fracture | 42 | MPa | ISO 527-3 |
| TD: Fracture | 30 | MPa | ISO 527-3 |
| Tensile strain | |||
| MD: Fracture | 350 | % | ISO 527-3 |
| TD: Fracture | 180 | % | ISO 527-3 |
| Process Conditions | |||
|---|---|---|---|
| extrusion | Nominal value | Unit | Test method |
| Processing temperature | 140 – 160 | ℃ | |
| Gap between material ports | 0.8 – 1.0 | mm | |
| Explosion rate | 2 – 4 | ||
| drying temperature | 80 | ℃ | |
| Drying time | 5 | hr | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |