BIOPLAST® 105

About
BIOPLAST 105 is BIOTEC’s trademark for a completely new, plasticizer-free thermoplastic material. As a result of plasticizer absence no material built-up or steam occurs during processing of BIOPLAST 105. The material is extremely suitable for injection moulding, sheet film extrusion and blown film extrusion of completely biodegradable products. The complete biodegradability and other functional properties enable the converter to advance in production areas, which could not be reached with traditional thermoplastic materials.&&

About

BIOPLAST 105 is BIOTEC’s trademark for a completely new, plasticizer-free thermoplastic material. As a result of plasticizer absence no material built-up or steam occurs during processing of BIOPLAST 105. The material is extremely suitable for injection moulding, sheet film extrusion and blown film extrusion of completely biodegradable products. The complete biodegradability and other functional properties enable the converter to advance in production areas, which could not be reached with traditional thermoplastic materials.&&

Product Description
Generic	热塑性聚酯
Material Status	Commercial: Active
Features	Good Rigidity,Renewable resources,Low or no water absorption,Good Printability,Biodegradable,Food contact compliance,Moisture resistance,Grease resistance,Gasoline resistance,Good coloring
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
film	Nominal value	Unit	Test method
film thickness
test	> 10	µm
tensile strength			ISO 527-3
MD，23℃，10 µm	20.0 to 50.0	MPa
TD，23℃，10 µm	20.0 to 50.0	MPa
Tensile strain			ISO 527-3
MD, fracture, 10 µ m	100 to 900	%
TD, fracture, 10 µ m	100 to 900	%
Water vapor transmittance
10 µm	70 to 90	g/m²/24 hr	DIN 53122

PHYSICAL	Nominal value	Unit	Test method
Density	1.10 to 1.30	g/cm³	ISO 1183/A
Apparent density	0.75 to 0.83	g/cm³	ISO 60
Melt Flow Rate
190℃，2.16kg	3.0 to 11	g/10min	ISO 1133
water content		%	Internal Method
Particle size	3.00 to 4.00	mm
Melt density	1.00 to 1.20	g/cm³	ISO 1133

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.