BJB Epoxy TC-1651 A/B

About
TC-1651 A/B is an aluminum powder filled epoxy casting resin system that provides service temperatures in the range of 340°F (171°C). TC-1651 A/B is most commonly used for the construction of molds that require good heat conductivity, outstanding durability, and that provide production run capability.&&

PHYSICAL	Nominal value	Unit	Test method
Density	1.70	g/cm³	ASTM D792
Density
Part A：25℃	1.796	g/cm³
Part B：25℃	0.988	g/cm³
Shrinkage rate	0.20	%	ASTM D2566
Brookfield viscosity
Mixing, 25 ℃	12.8	Pa·s

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	113	℃	ASTM D648
Linear coefficient of thermal expansion
MD	3.6E-5	1/℃	ASTM D3386
Thermosetting components
Component A	按重量计算的混合比: 100
Component B	按重量计算的混合比: 9.0
Storage period	52	wk
stripping time
25℃	16.0 to 24.0	hr
Gelation time	3.0	hr	ASTM D2471
working hours
25℃	2.0	hr

Notes
1. Typical properties: these are not to be construed as specifications.
2. Part B, 77°F
3. Part A, 77°F
4. Mixed
5. 1 lb mass
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.