| About |
|---|
| BJB’s “F-1 Series”, with its 3 to 10 minutes of work time, addresses the need for shorter processing times and higher part production. These 5-95 Shore A products exhibit excellent physical properties and easily process at room temperature. You’ll also find the easy mix ratio to be extremely convenient. F-131 can be cartridge-dispensed with our CPE handheld dispense equipment. For longer work times consider our M Series or L Series of elastomers. RoHS/REACH Compliant Popular for Parts & Molds High Tensile & Tear Strength Special Effects & Props Medical Training Models Easy to Pigment&& |
| Product Description | |
|---|---|
| Generic | TSU |
| Material Status | Commercial: Active |
| Features | Good Tensile Strength,Good tear strength,Good coloring |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 1.01 | g/cm³ | |
| — | 1.03 | g/cm³ | ASTM D792 |
| Specific volume | 0.981 | cm³/g | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 3.10 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 2000 | % | ASTM D412 |
| tear strength | 17.5 | kN/m | ASTM D624 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | |||
| 1 MHz | 5.32 | ASTM D150 | |
| Dissipation factor | |||
| 1 MHz | 0.045 | ASTM D150 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 100, 按容量计算的混合比: 99 | ||
| Component B | 按重量计算的混合比: 100, 按容量计算的混合比: 100 | ||
| Storage period | |||
| 25℃ | 26 | wk | |
| Thermosetting mixed viscosity | |||
| 25℃ | 1300 | cP | |
| 25℃ | 870 | cP | |
| stripping time | |||
| 25℃ | 60 to 120 | min | |
| Gelation time | 4.0 to 4.5 | min | |
| working hours | |||
| 25℃ | 3.0 to 3.5 | min |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Curing time | |||
| 25℃ | 5.0 to 7.0 | day | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 25 to 35 | ASTM D2240 | |
| Tensile modulus | 1.03 | MPa | ASTM D412 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Part B, 77°F |
| 3. Part A, 77°F |
| 4. Mixed |
| 5. Part B |
| 6. Part A |
| 7. 100g mass |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |