| About |
|---|
| The “F-1” Series of polyurethane elastomers range in hardness from 5 – 95 Shore A. These products were developed with shorter processing times in mind. F-195 features an easy mix ratio with excellent physical properties. If more work time is needed, consider our “M” Series of polyurethane elastomers (Medium work life). The F-195 is ideal for: Part Production Molds Special Effects and Props Strain Relief Pigmenting And Much More&& |
| Product Description | |
|---|---|
| Generic | TSU |
| Material Status | Commercial: Active |
| Features | Good coloring |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 1.08 | g/cm³ | |
| — | 1.09 | g/cm³ | |
| — | 1.11 | g/cm³ | ASTM D792 |
| Specific volume | 0.925 | cm³/g | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 28.9 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D412 |
| tear strength | 75.8 | kN/m | ASTM D624 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | |||
| 1 MHz | 4.81 | ASTM D150 | |
| Dissipation factor | |||
| 1 MHz | 0.045 | ASTM D150 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 100, 按容量计算的混合比: 100 | ||
| Component B | 按重量计算的混合比: 50, 按容量计算的混合比: 50 | ||
| Storage period | |||
| 25℃ | 26 | wk | |
| Thermosetting mixed viscosity | |||
| 25℃ | 5420 | cP | |
| 25℃ | 1400 | cP | |
| 25℃ | 3720 | cP | |
| stripping time | |||
| 25℃ | 60 to 300 | min | |
| Gelation time | 12.0 to 13.0 | min | |
| working hours | |||
| 25℃ | 8.0 to 10.0 | min |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Curing time | |||
| 25℃ | 5.0 to 7.0 | day | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 90 to 100 | ASTM D2240 | |
| Tensile modulus | 33.3 | MPa | ASTM D412 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Part B, 77°F |
| 3. Part A, 77°F |
| 4. Mixed |
| 5. Part B |
| 6. Part A |
| 7. 100g mass |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |