BJB Polyurethane L-3530 A/B

About
BJB’s L Series, with its 20 to 35 minute work time, is perfect for manufacturing larger or more complex parts and molds. The L-3530 is a 30 Shore A material offering exceptional physical properties. You’ll find the 1:1 ratio to be extremely convenient whether you’re hand mixing or cartridge-dispensing with our CPE handheld dispense equipment. For faster work times consider BJB’s F-1 or M Series of urethane elastomers. RoHS/REACH compliant Vibration Dampening Industrial Rollers Plaster and Concrete Molds Over Molding Strain Reliefs&&

About

BJB’s L Series, with its 20 to 35 minute work time, is perfect for manufacturing larger or more complex parts and molds. The L-3530 is a 30 Shore A material offering exceptional physical properties. You’ll find the 1:1 ratio to be extremely convenient whether you’re hand mixing or cartridge-dispensing with our CPE handheld dispense equipment. For faster work times consider BJB’s F-1 or M Series of urethane elastomers. RoHS/REACH compliant Vibration Dampening Industrial Rollers Plaster and Concrete Molds Over Molding Strain Reliefs&&

Product Description
Generic	TSU
Material Status	Commercial: Active
Features	noise reduction
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density
—	1.02	g/cm³
—	1.03	g/cm³	ASTM D792
Specific volume	0.975	cm³/g

elastic body	Nominal value	Unit	Test method
tensile strength	5.27	MPa	ASTM D412
Tensile strain
fracture	940	%	ASTM D412
tear strength	16.1	kN/m	ASTM D624

Electrical performance	Nominal value	Test method
Dielectric constant
1 MHz	5.77	ASTM D150
Dissipation factor
1 MHz	0.058	ASTM D150

THERMAL	Nominal value	Unit
Thermosetting components
Component A	按重量计算的混合比: 100, 按容量计算的混合比: 100
Component B	按重量计算的混合比: 100, 按容量计算的混合比: 100
Storage period	26	wk
Thermosetting mixed viscosity
25℃	1500	cP
25℃	780	cP
25℃	1080	cP
stripping time
25℃	480 to 840	min
Gelation time	1.0 to 1.1	hr
working hours
25℃	30.0 to 35.0	min

Supplementary information	Nominal value	Unit
Curing time
25℃	5.0 to 7.0	day

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	25 to 35		ASTM D2240
Tensile modulus	0.965	MPa	ASTM D412

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.