| About |
|---|
| BJB’s “M Series” with work times between 10 and 20 minutes is perfect for a variety of part and mold applications. These flexible systems exhibit exceptional physical properties. M-3125 is ideal for processing by hand or cartridge-dispensing with our CPE handheld dispense equipment. For faster work time see our F-1 Series and for longer work times see the L Series of urethane elastomers. RoHS/REACH compliant Vibration Dampening Industrial Rollers Medical Training Models Over Molding Strain Reliefs&& |
| Product Description | |
|---|---|
| Generic | TSU |
| Material Status | Commercial: Active |
| Features | noise reduction |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 1.02 | g/cm³ | |
| — | 1.03 | g/cm³ | ASTM D792 |
| Specific volume | 0.982 | cm³/g | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 5.38 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 1400 | % | ASTM D412 |
| tear strength | 14.0 | kN/m | ASTM D624 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | |||
| 1 MHz | 5.28 | ASTM D150 | |
| Dissipation factor | |||
| 1 MHz | 0.046 | ASTM D150 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 100, 按容量计算的混合比: 100 | ||
| Component B | 按重量计算的混合比: 100, 按容量计算的混合比: 100 | ||
| Storage period | |||
| 25℃ | 26 | wk | |
| Thermosetting mixed viscosity | |||
| 25℃ | 665 | cP | |
| 25℃ | 1050 | cP | |
| 25℃ | 1100 | cP | |
| stripping time | |||
| 25℃ | 240 to 360 | min | |
| Gelation time | 30.0 to 35.0 | min | |
| working hours | |||
| 25℃ | 15.0 to 20.0 | min |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Curing time | |||
| 25℃ | 5.0 to 7.0 | day | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 20 to 30 | ASTM D2240 | |
| Tensile modulus | 0.689 | MPa | ASTM D412 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Part B, 77°F |
| 3. Mixed |
| 4. Part B |
| 5. Part A |
| 6. 100g mass |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |