| About |
|---|
| SC-80 is a single component aliphatic polyurethane which fully reacts using water as its dispersing agent. Originally developed as a primer for painting flexible polyurethane materials, the SC-80 is often used as a top-coat or a product that will seal porous substrates. Tough yet flexible film Low temperature flexibility Excellent water resistance Easy to pigment with water-based pigments&& |
| Product Description | |
|---|---|
| Generic | TSU |
| Material Status | Commercial: Active |
| Features | Good flexibility,Low or no water absorption,Ultra high toughness,Low temperature toughness,Good coloring |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.01 | g/cm³ | |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 25℃ | 20.0 | cP | ASTM D2393 |
| drying time | |||
| 25℃ | 3.0 | hr |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |