BJB Polyurethane TC-9460 A/B

About
BJB Polyurethane TC-9460 A/B是一种热固性聚氨酯弹性体 (TSU)材料,。该产品在北美洲有供货,。 BJB Polyurethane TC-9460 A/B的主要特性有: High Toughness 低粘度耐冲击耐磨典型应用领域包括: 包袋/内衬采矿业应用&&

Product Description
Generic	TSU
Material Status	Commercial: Active
Features	High impact resistance,Low Viscosity,Ultra high toughness,Good wear resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.07	g/cm³	ASTM D792
Shrinkage rate
MD	0.20	%	ASTM D955

elastic body	Nominal value	Unit	Test method
tear strength	98.9	kN/m	ASTM D624

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	750	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Storage period
25℃	26	wk

Thermosetting mixed viscosity	Nominal value	Unit	Test method
25℃	1700	cP	ASTM D2393
stripping time
25℃	240 to 300	min
Post curing time
74℃	16	hr

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	60		ASTM D2240
Tensile modulus	324	MPa	ASTM D638
tensile strength	33.1	MPa	ASTM D638
Tensile strain
fracture	330	%	ASTM D638
Bending modulus	276	MPa	ASTM D790
bending strength	11.0	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.