Boltaron 1050 - SOLIAO

About
Ultra-high quality, corrosion resistant, fire- rated sheet up to 4 in. (102 mm) thick in gray, white and black for fabricating, machining and thermoforming applications Boltaron 1050 sheet is a monolithic Type 1 PVC sheet that is free of pits, voids and inclusions, and not subject to delamination associated with competitive heavy gauge sheet. It is inert to harsh chemicals across the entire pH range, making it suitable for applications in which acids and caustics are handled. Since it does not ionize like stainless steel and high alloys, it is also ideal for applications involving ultrapure water, reagent-grade chemicals or other contamination-sensitive products. Boltaron 1050 sheet is offered in lengths to 96 in. (2438 mm), widths to 48 in. (1219 mm) and thicknesses from .032 to 4 in. (0.81 to 102 mm). Smooth on both sides, it is available from stock in dark gray (no minimums), and in white and black (low minimums). It is also available in custom colors, custom textures and custom sizes, and/or with poly masking (low minimums). The sheet carries a UL 94 V-0 fire rating and conforms to ASTM D- 1784 standards, conforming to a wide range of application requirements. Boltaron 1050 is readily sawn, drilled, tapped, routed and otherwise machined using conventional tools, and can be brake formed (thinner gauges), heat welded, adhesive bonded and mechanically fastened, allowing rapid fabrication of a broad range of high-integrity parts and assemblies.&&

About

Ultra-high quality, corrosion resistant, fire- rated sheet up to 4 in. (102 mm) thick in gray, white and black for fabricating, machining and thermoforming applications Boltaron 1050 sheet is a monolithic Type 1 PVC sheet that is free of pits, voids and inclusions, and not subject to delamination associated with competitive heavy gauge sheet. It is inert to harsh chemicals across the entire pH range, making it suitable for applications in which acids and caustics are handled. Since it does not ionize like stainless steel and high alloys, it is also ideal for applications involving ultrapure water, reagent-grade chemicals or other contamination-sensitive products. Boltaron 1050 sheet is offered in lengths to 96 in. (2438 mm), widths to 48 in. (1219 mm) and thicknesses from .032 to 4 in. (0.81 to 102 mm). Smooth on both sides, it is available from stock in dark gray (no minimums), and in white and black (low minimums). It is also available in custom colors, custom textures and custom sizes, and/or with poly masking (low minimums). The sheet carries a UL 94 V-0 fire rating and conforms to ASTM D- 1784 standards, conforming to a wide range of application requirements. Boltaron 1050 is readily sawn, drilled, tapped, routed and otherwise machined using conventional tools, and can be brake formed (thinner gauges), heat welded, adhesive bonded and mechanically fastened, allowing rapid fabrication of a broad range of high-integrity parts and assemblies.&&

Product Description
Generic	PVC, not specified
Material Status	Commercial: Active
Features	Good surface appearance,High impact resistance,Corrosion Resistant,V-0
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.37	g/cm³	ASTM D792
Water absorption rate
24hr	0.032	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	53 to 160	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	73.9	℃	ASTM D648
Vicat Softening Temp	29.4	℃	ASTM D1525
Linear coefficient of thermal expansion
MD	5.3E-5	1/℃	ASTM D696
specific heat	837	J/kg/℃	ASTM C351
Thermal conductivity coefficient	0.10	W/m/K	ASTM C177

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.5E+14	ohms·cm	ASTM D257
Dielectric strength	22	kV/mm	ASTM D149
Dielectric constant
60 Hz	2.91		ASTM D150
Dissipation factor
60 Hz	0.018		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
0.80 mm	V-0		UL 94

Supplementary information	Nominal value	Unit	Test method
Loss Index	0.0510		ASTM D150

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	82		ASTM D2240
Rockwell hardness
R-level	116		ASTM D785
Tensile modulus	2760	MPa	ASTM D638
tensile strength
yield	51.0	MPa	ASTM D638
Tensile strain			ASTM D638
yield	3.5	%	ASTM D638
fracture	130	%	ASTM D638
Bending modulus	2900	MPa	ASTM D790
bending strength
yield	82.7	MPa	ASTM D790
compressive strength	74.7	MPa	ASTM D695
shear strength	63.7	MPa	ASTM D732

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.