Boltaron 4125 - SOLIAO

About
Boltaron 4125 is a normal impact, high temperature, corrosion resistant CPVC sheet with an industrial smooth finish on both sides. Boltaron 4125 conforms to ASTM D-1784. Standard Color: Light Gray (2028) Custom Colors: Upon Request (min. order required) Gauges: .032 to 3″ Width: 48″ Length: 96″ Custom Sizes: Upon request Standard Texture: Industrial Smooth (Both Sides) Custom Textures: Upon Request Poly Masking: Upon Request Suggested Applications: Fume Hoods and Ducts Machined Parts Fume Scrubbers Acid Etching Machines Acid Tanks and Linings&&

About

Boltaron 4125 is a normal impact, high temperature, corrosion resistant CPVC sheet with an industrial smooth finish on both sides. Boltaron 4125 conforms to ASTM D-1784. Standard Color: Light Gray (2028) Custom Colors: Upon Request (min. order required) Gauges: .032 to 3″ Width: 48″ Length: 96″ Custom Sizes: Upon request Standard Texture: Industrial Smooth (Both Sides) Custom Textures: Upon Request Poly Masking: Upon Request Suggested Applications: Fume Hoods and Ducts Machined Parts Fume Scrubbers Acid Etching Machines Acid Tanks and Linings&&

Product Description
Generic	CPVC
Material Status	Commercial: Active
Features	Good surface appearance,High impact resistance,Corrosion Resistant,V-0
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.51	g/cm³	ASTM D792
Water absorption rate
24hr	0.035	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	53 to 110	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	100	℃	ASTM D648
Vicat Softening Temp	41.1	℃	ASTM D1525
Linear coefficient of thermal expansion
MD	8.0E-5	1/℃	ASTM D696
specific heat	920	J/kg/℃	ASTM C351
Thermal conductivity coefficient	0.092	W/m/K	ASTM C177

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	2.4E+15	ohms·cm	ASTM D257
Dielectric strength	60	kV/mm	ASTM D149
Dielectric constant			ASTM D150
10 kHz	2.97		ASTM D150
100 kHz	2.91		ASTM D150
1 MHz	2.85		ASTM D150
Dissipation factor			ASTM D150
10 kHz	0.012		ASTM D150
100 kHz	0.015		ASTM D150
1 MHz	0.017		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
0.80 mm	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	82		ASTM D2240
Rockwell hardness
R-level	118		ASTM D785
Tensile modulus	2760	MPa	ASTM D638
tensile strength
yield	52.4	MPa	ASTM D638
Tensile strain
fracture	37	%	ASTM D638
Bending modulus	2410	MPa	ASTM D790
bending strength
yield	75.8	MPa	ASTM D790
compressive strength	78.6	MPa	ASTM D695
shear strength	63.6	MPa	ASTM D732

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.