Boltaron 4330 - SOLIAO

About
Boltaron 4330 is a proprietary, fire retardant, extruded PVC/Acrylic alloy for aircraft interior components that offers a UL 94 V-0 rating and meets stringent FAA flammability requirements while exhibiting exceptional physical properties. It offers Izod Impact resistance of 18 ft lbs/in. (953 J/m), significantly improving the durability of thermoformed aircraft interior components. It also offers other exceptional physical properties, extreme formability and consistent surface quality, and is available in an unlimited range of colors and textures. As a result, Boltaron 4330 is specified by the world’s leading commercial, military and private aircraft and helicopter manufacturers, carriers and interior refurbishing contractors, for thermoformed, fabricated and machined interior components of unequalled durability and appearance.&&

About

Boltaron 4330 is a proprietary, fire retardant, extruded PVC/Acrylic alloy for aircraft interior components that offers a UL 94 V-0 rating and meets stringent FAA flammability requirements while exhibiting exceptional physical properties. It offers Izod Impact resistance of 18 ft lbs/in. (953 J/m), significantly improving the durability of thermoformed aircraft interior components. It also offers other exceptional physical properties, extreme formability and consistent surface quality, and is available in an unlimited range of colors and textures. As a result, Boltaron 4330 is specified by the world’s leading commercial, military and private aircraft and helicopter manufacturers, carriers and interior refurbishing contractors, for thermoformed, fabricated and machined interior components of unequalled durability and appearance.&&

Product Description
Generic	PMMA+PVC
Material Status	Commercial: Active
Features	High impact resistance,Flame Characteristics
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.41	g/cm³	ASTM D792
Shrinkage rate
MD	0.50 to 0.70	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	960	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	71.7	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level		UL 94
1.20 mm	V-0 5VB	UL 94
3.00 mm	V-0 5VA	UL 94
Radiation plate flame spread index
3.18 mm	< 10.0	ASTM E162

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	110		ASTM D785
tensile strength
yield	37.2	MPa	ASTM D638
Bending modulus	2280	MPa	ASTM D790
bending strength
yield	63.4	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.