| About |
|---|
| Boltaron 4350 is a clear proprietary rigid sheet developed specifically for aircraft interior applications. Passing stringent FAA flammability requirements, Boltaron 4350 is an ideal solution for aircraft interior components requiring high chemical resistance and design flexibility. Standard Color: Clear Gauges: .062 to .500″ Width: 48″ Length: 96″ Custom Sizes: Upon request Custom Textures: Falmouth, Suede, Smooth Suggested Applications: Life Vest Covers Class Dividers Privacy Dividers Equipment Windows Machined Parts Thermoformed Parts&& |
| Product Description | |
|---|---|
| Generic | PVC，刚硬 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Flame Characteristics,Solvent resistance,V-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.37 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.050 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 530 to 640 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 65.6 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 4.5E-5 | 1/℃ | ASTM D696 |
| specific heat | 1210 | J/kg/℃ | ASTM C351 |
| Thermal conductivity coefficient | 0.072 | W/m/K | ASTM C177 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| FAA Flammability | 1.0 0.2 | min | FAR 25.853 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 80 | ASTM D2240 | |
| Rockwell hardness | |||
| R-level | 105 | ASTM D785 | |
| Tensile modulus | 2070 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 41.4 | MPa | ASTM D638 |
| Bending modulus | 2410 | MPa | ASTM D790 |
| bending strength | |||
| yield | 65.5 | MPa | ASTM D790 |
| compressive strength | 51.0 | MPa | ASTM D695 |
| shear strength | 36.5 | MPa | ASTM D732 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Pass |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |