| About |
|---|
| Boltaron 4550 is an extruded Acrylic/PVC Alloy sheet, capped with a clear, high gloss, acrylic Korad® film. Boltaron 4550 offers excellent UV resistance, impact strength, abrasion resistance, stain and chemical resistance, and thermoformability. Colors: Custom Gauges: .040 to .250 Widths: Up to 60″ Lengths: Up to 120″ Custom Sizes: Upon Request Textures: Coarse Matte (CM) Felt (FT) Haircell (HC) Levant (LT) Mesa (MS) Suede (SD)&& |
| Product Description | |
|---|---|
| Generic | PMMA+PVC |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good surface appearance,The fouling resistance,High impact resistance,Good wear resistance,Solvent resistance,V-0 |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.41 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 800 to 960 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 71.7 to 72.8 | ℃ | ASTM D648 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 | |
| FAA Flammability | 1.0 0.2 | min | FAR 25.853 |
| Radiation plate flame spread index | |||
| 3.18 mm | < 10.0 | ASTM E162 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| QUV aging testing machine | 3.25 | ||
| Forming temperature | 168 to 188 | ℃ | |
| Xenon aging testing machine | 0.750 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 108 to 110 | ASTM D785 | |
| tensile strength | |||
| yield | 34.5 to 37.2 | MPa | ASTM D638 |
| Bending modulus | 2070 to 2280 | MPa | ASTM D790 |
| bending strength | |||
| yield | 59.3 to 63.4 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Pass |
| 3. 2700 hrs, Delta E |
| 4. 500 hrs, Delta E |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |