Boltaron 9230 - SOLIAO

About
Boltaron 9230 is a proprietary, extruded sheet, designed for use as aircraft window shades. Boltaron 9230 offers maximum light blocking characteristics, excellent impact strength, abrasion resistance, stain and chemical resistance, and thermoformability. Boltaron 9230 meets stringent FAA regulations for flammability. Boltaron 9230 is available as a single color (9230) or as a double color (9230C) construction. Colors: Custom Gauges: 0.047 to 0.060 Widths: Up to 48″ Lengths: Up to 120″ Textures: Coarse Matte (CM) Felt (FT) Haircell (HC) Levant (LT) Mesa (MS) Suede (SD)&&

About

Boltaron 9230 is a proprietary, extruded sheet, designed for use as aircraft window shades. Boltaron 9230 offers maximum light blocking characteristics, excellent impact strength, abrasion resistance, stain and chemical resistance, and thermoformability. Boltaron 9230 meets stringent FAA regulations for flammability. Boltaron 9230 is available as a single color (9230) or as a double color (9230C) construction. Colors: Custom Gauges: 0.047 to 0.060 Widths: Up to 48″ Lengths: Up to 120″ Textures: Coarse Matte (CM) Felt (FT) Haircell (HC) Levant (LT) Mesa (MS) Suede (SD)&&

Product Description
Generic	PVC, not specified
Material Status	Commercial: Active
Features	The fouling resistance,High impact resistance,Flame Characteristics,Good wear resistance,Solvent resistance
Availabilitys	North America
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.42	g/cm³	ASTM D792

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	800 to 960	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	71.7 to 72.8	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Test method
FAA Flammability		FAR 25.853
12 sec.	Pass	FAR 25.853
60 sec.	Pass	FAR 25.853
Radiation plate flame spread index
3.18 mm	< 10.0	ASTM E162

Supplementary information	Nominal value	Unit	Test method
Forming temperature	168 to 188	℃

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	108 to 110		ASTM D785
tensile strength
yield	34.5 to 37.2	MPa	ASTM D638
Bending modulus	2070 to 2280	MPa	ASTM D790
bending strength
yield	59.3 to 63.4	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.