| About |
|---|
| Bondyram® TL4120 is a Maleic Anhydride Modified Polyethylene contains functional groups that enhance its adhesion to a variety of polymers such as polyethylene and its copolymers, Polyamide and EVOH. Bondyram® TL4120 functions as adhesive promoter in multilayer barrier packaging structures. , This product is food contact standards compliant. |
| Product Description | |
|---|---|
| Supplier | Ram-On |
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Good bond |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.5 | g/10min | ISO 1133 |
| Maleic anhydride content | Low | ||
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 94.0 | ℃ | ASTM D1525 2 |
| Melting temperature | 123 | ℃ | ISO 11357-3 |
| Process Conditions | |||
|---|---|---|---|
| Squeezing instructions | Nominal value | Unit | Test method |
| extrusion | Nominal value | Unit | Test method |
| Temperature of material cylinder zone 1 | 200 | °C | |
| Temperature of material cylinder zone 2 | 210 | °C | |
| Temperature of material cylinder zone 3 | 220 | °C | |
| Temperature of material cylinder zone 4 | 220 | °C | |
| Temperature of material cylinder zone 5 | 220 | °C | |
| Joint temperature | 220 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |