| About |
|---|
| Bondyram® TL4540 modified polyethylene contains functional groups that enhance its adhesion to various polyolefins, polyamides, EVOH, aluminum and polyesters (PET). The material functions as a tie-layer resin promoting adhesion in multilayer co-extrusion structures. Bondyram® TL4540 can also be used as an impact modifier for C-PET thermoformed trays. This product is food contact standards compliant. |
| Product Description | |
|---|---|
| Supplier | Ram-On |
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Good bond |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.5 | g/10min | ISO 1133 |
| Maleic anhydride content | High | ||
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 85.0 | ℃ | ASTM D1525 2 |
| Melting temperature | 112 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |