BONDZ BO 144 - SOLIAO

About
Selenis Bondz BO 144 is a copolyester specifically designed for sealing layers in BOPET films and delivers an extremely slow rate of crystallisation. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, securing full protection of the final product. Selenis Bondz BO 144 greatly improves your converting steps, such as laminating, metalizing and printing. Selenis Bondz BO 144 is an amorphous copolyester resin dedicated to twin-screw extrusion. When using this kind of equipment, no drying is required prior to extrusion.&&

About

Selenis Bondz BO 144 is a copolyester specifically designed for sealing layers in BOPET films and delivers an extremely slow rate of crystallisation. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, securing full protection of the final product. Selenis Bondz BO 144 greatly improves your converting steps, such as laminating, metalizing and printing. Selenis Bondz BO 144 is an amorphous copolyester resin dedicated to twin-screw extrusion. When using this kind of equipment, no drying is required prior to extrusion.&&

Product Description
Generic	PCTG
Material Status	Commercial: Active
Features	Good heat sealing,Renewable resources,Good bond,Good melt strength,Amorphous
Availabilitys	North America,Latin America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Intrinsic viscosity	0.66 to 0.70	dl/g	ISO 1628-5
Color b	< 1.00		ASTM D6290
Color L	> 63.0		ASTM D6290
Particle Shape	Cylindrical
Particle size	270 to 370	mg/20 chips
humidity	< 0.30	%

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	72.0	℃	ASTM D3410

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	60 to 65	°C
Drying time	8.0	hr
Recommended maximum moisture content	4.0E-3	%
Melt temperature	250 to 270	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.