Borcell™ HE1346

About
It is is a fully formulated compound for chemical foamed telesingles. Borcell HE1346 is a high-density polyethylene compound containing chemical blowing agent. Borcell HE1346 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: BS 6234: Type H03 EN 50290-2-23 IEC 60708 NF C32-060&&

Product Description
SupplierBorealis AG
GenericHDPE
Material StatusCommercial: Active
FeaturesExcellent Processability,Good surface appearance,Good Dimensional Stability,Foaming performance
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe
Process MethodsExtrusion

Technical Data
PHYSICALNominal valueUnitTest method
Density ISO 1183
0.945g/cm³ISO 1183
0.943g/cm³ISO 1183
Apparent density0.50 to 0.60g/cm³ISO 60

MECHANICALNominal valueUnitTest method
tensile strength 
yield13.0MPaIEC 60811-1-1
yield23.0MPaISO 527-2/50
Tensile strain 
fracture500%IEC 60811-1-1
fracture600%ISO 527-2/50

THERMALNominal valueUnitTest method
Oxidation induction time
200℃50minIEC 60811-4-2/B

Electrical performanceNominal valueUnitTest method
Dielectric constant
1 MHz2.33 IEC 60250
Dissipation factor
1 MHz4.0E-4 IEC 60250

Supplementary informationNominal valueUnitTest method
Heat aging resistance
105℃2.1monthIEC 60811-4-2/A

Process Conditions
ExtrusionNominal valueUnitTest method
Barrel 1 zone temperature155°C
Barrel 2 zone temperature170°C
Barrel 3 zone temperature185°C
Barrel 4 zone temperature195°C
Connector temperature195°C
Nozzle temperature195°C

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.