About |
---|
Borclean HC300BF is a high cristallinity homopolymer film resin. Borclean HC300BF is recommended for: BOPP Dielectrical film for capacitors Metallisable film Borclean HC300BF does not contain slip or antiblock additives. Borclean HC300BF is optimised to deliver: Super high purity Improved high thermal stability Low dissipation factor Good stiffness Easy surface roughness control Outstanding processability Metallisable Very low ash content&& |
Product Description | |
---|---|
Supplier | Borealis AG |
Generic | PP homopolymerization |
Material Status | Commercial: Active |
Features | Good Rigidity,Excellent Processability,High purity,Renewable resources,Crystal,Low smoothness,Heat Stabilized,Homopolymer |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Process Methods | Film extrusion |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Melt Flow Rate | |||
230℃,2.16kg | 3.3 | g/10min | ISO 1133 |
Ash Content | 10 to 20 | ppm | ISO 3451-1 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Melting temperature | |||
DSC | 161 to 165 | ℃ | ISO 3146 |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Dielectric constant | 2.25 | IEC 60250 |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Calcium | 2 | ppm | Internal Method |
Catalyst Residue | Internal Method | ||
Aluminium(ICP) | 2 to 4 | ppm | Internal Method |
Chloride(XRF) | 1 to 3 | ppm | Internal Method |
Titanium(ICP) | 1 to 3 | ppm | Internal Method |
Isotactic Index | 98 | % | Internal Method |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |